• Overview   • Automobiles Components + Sealed Connectors + Unsealed Connectors + High Frequency Connector + PCB Connectors + Bracket List   • Automobiles Cables + General wire - Heat Resistant Wires         - AVX + AVSSX + AVSSH         - AEX + AESSX     + Shielded Cables + Reference + Corrugated Tube + Certification     • Catalog Download                     Products >Automobiles Cables > Heat Resistant Wires > AVX.AEX       A : Low-voltage wires for automobiles  V : Vinyl  E : Polyethylene  X : Crosslinked   USE   ·Wires used in low voltage circuits in automobiles (vehicles and motorcycles); especially used for circuits requiring heat resistance. FEATURES   Provides higher reliability in heat resistance than conventional AV wires due to emission bridging. Standard:JASO D 608   Type Symbol Heat-Resistance Category Crosslinked vinyl heat-resistant low-voltage wires for automobiles AVX 100ºC Crosslinked polyethylene heat-resistant low-voltage wires for automobiles AEX 120ºC   CONSTRUCTION AND PERFORMANCE     AXV   Nominal size *1 Conductor Insulation Overall diameter (mm) Conductor resistance (20ºC) (mm) *2 Current limit (A) *3 Approx. weight (g/m) Stan- dard length (m) *4 Const- ruction (No./mm) Calcu- lated area (mm2) Outer diameter (mm) Thick- ness (mm) Stan- dard (mm) Max. (mm) 0.5f 20/0.18 0.5087 1.0 0.5 2.0 2.2 36.7(38.6) 11 8 1,000 0.75f 30/0.18 0.7630 1.2 0.5 2.2 2.4 24.4(25.8) 14 11 500 1.25f 50/0.18 1.273 1.5 0.6 2.7 2.9 14.7(15.5) 19 17 500 2 26/0.32 2.0910 1.9 0.6 3.1 3.4 8.81(9.3) 26 25 300 3 41/0.32 3.2970 2.4 0.7 3.8 4.1 5.59(5.9) 36 39 200   *1   The "f" in the nominal size column indicates a flexible conductor with a finer wire diameter. *2   The values ( ) indicate tinned conductors. *3   The current limit data is for conductor temperature of 100ºC (maximum allowable temperature) and an ambient temperature of 60ºC *4   Standard packing shapes shall be coils. However, the products which length are indicated in ( ) shall be wound on drums.                     AEX           Nominal size *1 Conductor Insulation Overall diameter (mm) Conductor resistance (20ºC) (mm) Current limit (A) *2 Approx. weight (g/m) Stan- dard length (m) *3 Const- ruction (No./mm) Calcu- lated area (mm2) Outer diameter (mm) Thick- ness (mm) Stan- dard (mm) Max. (mm) 0.5f 20/0.18 0.5087 1.0 0.5 2.0 2.2 38.6 10 8 1,000       *1   The "f" in the nominal size column indicates a flexible conductor with a finer wire diameter. *2   The current limit data is for conductor temperature of 120ºC (maximum allowable temperature) and an ambient temperature of 80ºC *3   Standard packing shapes shall be coils. However, the products which length are indicated in ( ) shall be wound on drums.